Description
Takex PIR-30WE Passive Infrared Sensor
Features:
- High quality mirrored optics coupled with twin pyros
- Installation height 2m to 3.5m (6.6' to 11.5')
- Durable weatherproof AES resin housing
- Sensitivity adjustment from 30% to 170%
- Protective hood to deflect rain/sunlight and guard against wildlife
Specifications
Detection system | Passive infrared |
Coverage | Wide angle: 100' (30m) Max. |
Sensitive zone | 30 pairs (60 zones) |
Mounting height | 2m to 3.5m (6.6' to 11.5') |
Supply voltage | 9 to 30V DC (non-polarity) |
Current consumption | 25mA Max. |
Alarm output | ・ Dry contact (semi-conductor) output (N.C./N.O.) ・ 24V (AC/DC) 0.25A (resistive load) (protective resistor 3.3Ω) ・ Warm up: Approx. 1 min. (No alarm condition) ・ One-shot output at detection (Approx.2sec.) ・ Continuously output when detecting low supply voltage. |
Tamper output | ï½¥ Dry contact output : (N.C.) ï½¥ 30V (AC/DC) 0.1A (resistive load) ï½¥ Tamper output: Real time output |
LED indicator | Red LED: ï½¥ Blinks during warm up (Approx. 1min.) ï½¥ One shot lights (Approx. 2sec.) at detection ï½¥ Continuously lights when detecting low supply voltage. |
Functions | ï½¥ Low supply voltage alarm ï½¥ Tamper signal ï½¥ LED control (L/C) ï½¥ Alarm LED (ON/OFF) ï½¥ Sensitivity adjustable between 30% and 170% |
Adjustment | Vertical: 10° Horizontal: +/-5° |
Mounting position | Indoor or outdoor wall |
Wiring | Terminals |
Weight | 1600g (56oz) |
Appearance | Body: AES resin Cover: PE resin |
Accessory | Water-proof grommet: 1pc Tapping screw: 2pcs |
Ambient temperature | -20°C to +50°C (-4°F to +122°F) |
IP Rating | IP55 |