TV, RF & Satellite

The Hills Antenna FB607174 is a 48mm x 1250 ground mount that can be used as an alternative to a roof mount. It is suited to 80cm satellite dishes only. Features: The installation site should be chosen so that the dish will not be subjected to...

The Hills Antenna BC85108 is a DC switchable 2-way passive splitter that is 2.4GHz rated for Foxtel Stacker Satellite Technology. Features: Terrestrial freq. 5 - 862MHz Satellite freq. 950 - 2,400MHz Metal shielded housing F-Type...

The Hills Antenna BC85106 is an 8-way active splitter with 2.4GHz rated Foxtel Stacker Satellite Technology Features: 14dB gain for terrestrial and satellite Gain & slope adjustment  Local and line powering option Zinc die cast...

The Hills Antenna BC15484B 4-Way Passive Splitter divides the signal power into 4 equal portions. This is used when you require 4 TV outlets in the home and is designed for TV and Satellite signal applications 5 - 2400MHz. It is important to mount the...

The Hills Antenna BC15482B 2-Way Passive Splitter divides the signal power into 2 equal portions. This is used when you require 2 TV outlets in the home and is designed for TV and Satellite signal applications 5 - 2400MHz. It is important to mount the...

The Hills Antenna BC15166B 3-Way Passive Splitter divides the signal power into 3 equal portions. This is used when you require 3 TV outlets in the home and is designed for TV and Satellite signal applications 5 - 2400MHz. It is important to mount the...

The Hills Antenna BC15164B 6-Way Splitter divides the signal power into 6 equal portions. This is used when you require 6 TV outlets in the home and is designed for TV and Satellite signal applications 5-2400MHz. It is important to mounth the splitter as...

The Hills Antenna BC88214HR Earthing Skirting Plate has an F-Type female connection and a high return loss barrel.   It can be used to provide a SAT connection point at floor level upon the skirting board with earthing connection.

The Hills Antenna FB607251 is a centre mounted boom support brace for the Tru-Spec Antenna.

The Hills Antenna FB606874 300mm Fascia Riser Mount is designed to attach to the fascia of a building, situated underneath the gutter. The curve of the mast provides an ideal solution when adequate clearance for the gutter is required. The mount comes...

The Hills Antenna FB902048 comes in a pack of two 1.2m x 16mm stay bars to help support and brace fascia brackets. A stay bar collar will need to be purchased separately.   This pack is beneficial in any application where extra support is required...

The Hills Antenna FB607231A Ezy HD 900mm gutter mount is suitable for all domestic installations as well as C3 rated cyclone areas. It is the perfect solution for installers who are not able to mount a satellite directly on the roof due to safety...

The Hills Antenna FB607231 Ezy HD 600mm gutter mount is suitable for all domestic installations and in C3 Cyclone rated areas. It is the perfect solution for installers who are not able to mount a satellite directly on the roof due to safety reasons...

The Hills Antenna FB607186A satellite loft mount for metal tile roofs is a roof penetrating loft mount for tile roofs and steel frames. Features: Foxtel Approved IPL # F20457

The Hills Antenna FB607012A loft mount with internal plug is a roof penetrating loft mount for tile roofs and steel frames. Features: Foxtel Approved IPL # F30906

The Vertical Mount Adapter kits have been designed to suit all Hills Tru-Band antenna models with U-bolt mounting though the boom. This allows the antenna to be mounted in the correct orientation to suit all Australian areas with vertical signal...

The Hills Antenna FB607218 U-Bolt is a spare or replacement U-bolt for various Hills antenna ranges and is provided with nuts.   It can also be used with any custom DIY mounting application.   It is M8 x 80mm x 60C assembly and zinc plated.

The Hills Antenna FB607021 Pig Tail Eaves Bracket is a straight mast mount applicable for attaching to roof rafters of a building. The brackets are ideally suited to tile roof applications, providing adequate install height above the roof line. The...

The Hills Antenna FB902240 44.5mm guy plate is used as a spare or replacement for Telomast products.   It is a round lock ring to suit the mast diameter and is provided with one locking thumb bolt.

The Hills Antenna FB902194 Lock Ring for 44.5mm masts is used as a spare or replacement for Telomast products. It is a round lock ring to suit the mast diameter and is provided with one locking thumb bolt.