Clearance

ProquipDigital HDMI Upscaler & HD Multi Media Player Features: Inputs: 2 x HDMI, 2 x USB, 1 x DVI-D, 1 x AV, 1 x YPbPr, 1 x VGA Output: 1 x HDMI, 1 x Coaxial Upscales any of the SD sources to HDMI output 720P or 1080P Display ratio, 4:3,16:9, and...

Digitek RJ45 Mech to Suit Wallplates - CAT6 HPM Style These are backwards compatible with Cat5 and Cat5e cables. Designed so the cable can be installed with a Krone tool or similar, or with the built in clamp down locking system. Both standards T568A and...

The Hills BC84504 Optical Fibre Transmitter features include:   Supports LNB feeding of 22KHz and 13/18V DC Wideband input 45-2600MHz Wall mounting aluminum housing

The Hills Antenna BC71442B is a compression tool for F-Type RG11 coaxial cables.

The Hills Antenna BC85108 is a DC switchable 2-way passive splitter that is 2.4GHz rated for Foxtel Stacker Satellite Technology. Features: Terrestrial freq. 5 - 862MHz Satellite freq. 950 - 2,400MHz Metal shielded housing F-Type...

The Hills Antenna FB607231A Ezy HD 900mm gutter mount is suitable for all domestic installations as well as C3 rated cyclone areas. It is the perfect solution for installers who are not able to mount a satellite directly on the roof due to safety...

The Hills Antenna FB607186A satellite loft mount for metal tile roofs is a roof penetrating loft mount for tile roofs and steel frames. Features: Foxtel Approved IPL # F20457

The Hills Antenna BC85094 is a 4-way 20dB Tap with 2.4GHz rated Foxtel Stacker Satellite Technology Features: Zinc die cast housing, bright tin finish and solder shield bottom plate DC Switchable Two pieces of screws attached All ports F-connector,...

The Hills Antenna BC85093 is a 4-way 16dB Tap with 2.4GHz rated Foxtel Stacker Satellite Technology Features: Zinc die cast housing, bright tin finish and solder shield bottom plate DC Switchable Two pieces of screws attached All ports F-connector, 75...

The Hills Antenna BC85091 is a 2-way 20dB Tap with 2.4GHz rated Foxtel Stacker Satellite Technology Features: Zinc die cast housing, bright tin finish and solder shield bottom plate. Two pieces of screws attached All ports F-connector, 75 Ohm Grounding...

The Hills Antenna BC85089 is a 1 wire 2-way 12dB 2.4GHz tap that is Foxtel approved   Features: Foxtel Approved IPL # 31001

The Hills Antenna BC85102 PAL Power Injector is 12VDC and 1A and is used as a spare or replacement power injector for the Hills Q-Amp Masthead Amplifier series.

The Hills Antenna BC85097 1-Wire 2-Way 16dB attenuation tap can be used in MATV FTA & SAT cabling solutions and installations. Foxtel Approved # F31085

The Hills Antenna BC85095 1-Wire 2-Way 12dB attenuation tap can be used in MATV FTA & SAT cabling solutions and installations. Features: Foxtel Approved IPL # F31083

The Hills Antenna BC85051 1-wire 32-way output active splitter can be used in MATV FTA & SAT cabling solutions and installions. Features: Foxtel Approved IPL # F31018  

The Hills Antenna BC85050 1-wire 16-way output active splitter can be used in MATV FTA & SAT cabling solutions and installions. Features: Foxtel Approved IPL # F31068

The Hills Antenna BC3903 is a 120cm(1.2m) Satellite Dish that is Foxtel approved. It can be used for commercial installs and the 120cm Ku band receives offset feed. Suitable for Pay Tv. Features: Designed with low loss and high performance High Ingress...

The Hills Antenna BC2843 is a coaxial cable reel stand.

The Hills BC81262 is a 1 Way 15dB 860MHz Slim Line Tap for wall mount plates with F-Type Female connections. It can be used to provide a tap point at the outlet to monitor and test the in line signal quality without interruption.

The Hills Antenna FB607227 gutter mount metal frame kit is used to facilitate the installation of a gutter mount on a metal frame roof. It is not suitable for cyclone rated areas (please see FB607279). Features: NBN APL Approved - MA-2018-000019 Foxtel...