TV, RF & Satellite

The Hills Antenna BC2094 is a RG11 F-Type Male coaxial cable connector hexagonal crimp type with separate centre pin.   It can be used to provide a connection point for the end of cables between F-Type equipment.

The Hills Antenna BC72028A F-Type Male 75Ohm Waterproof Terminator is available in packs of 20. It can be used on any unused F-type ports of passive products, i.e. splitters and taps for stability. Features: Foxtel IPL #F30837

The Hills BC81262 is a 1 Way 15dB 860MHz Slim Line Tap for wall mount plates with F-Type Female connections. It can be used to provide a tap point at the outlet to monitor and test the in line signal quality without interruption.

The Hills Antenna BC80512 F-Type Female F81 HRL F Barrel is foxtel approved and is available in packs of 5. Features: Foxtel Approved IPL #F30826

The Hills Antenna BC89239A SAT/FTA Diplexer has two ports and suits the Clipsal outlet in 4 pack carton. It is used for combining or separating FTA and Satellite signals. Features: Foxtel Approved IPL #F10468

The Hills Antenna FB607236 is a tile roof mount for use with a free-to-air antenna. It is 1.4m in length and provides sturdy non-penetrating mounting capability.

The Hills Antenna FB607227 gutter mount metal frame kit is used to facilitate the installation of a gutter mount on a metal frame roof. It is not suitable for cyclone rated areas (please see FB607279). Features: NBN APL Approved - MA-2018-000019 Foxtel...

The Hills Antenna FB607188 U-Bolt is a spare or replacement U-bolt for various Hills antenna ranges and is provided with nuts. It can also be used with any custom DIY mounting application. It is M8 x 90mm x 63.5C assembly and zinc plated.

The Hills Antenna FB603554 1.4m wall bracket is the ideal bracket for domestic applications where roof mounting is not option. With just the addition of a u-bolt, this mast is easily utilised by all installers.

The Hills Antenna FB902186 B Section lock ring suits a 38mm mast.   It is a round lock ring to suit the mast diameter and is provided with one locking thumb bolt.

The Hills Antenna FB902178 A Section lock ring suits a 31.8mm mast.   It is a round lock ring to suit the mast diameter and is provided with one locking thumb bolt.  

The Hills Antenna FB607137C 2-Way tin tripod mount is an extra heavy duty satellite mount with a 1.2m x 76mm mast. It has been designed for use with 90cm and 1.2m satellite dishes and timber framed, metal clad roofs. It is suitable for installations in...

The Hills Antenna FB164A 12m telomast is suitable for applications where height is a necessity to gain appropriate signal for your antenna and to be clear of any obstructions that may cause interference. It is a teloscopic mast that expands from it's 3m...

The Hills Antenna FB607011A Extended Fascia is a Foxtel approved 65cm and 80cm satellite dish mount for fascia and wall mounting applications with masonry/brick walls. It is also NBN approved for fixed wireless applications in W50 regions A/B. It is used...

The Hills Antenna FB50A 6m Telomast Accessory Kit is an essential add on to your telomast purchase to assist with installation. The kit consists of: 2 retaining pins to assist mast extension 2 thumbscrews to stop rotation and movement of clamp...

The Hills BC87182 Metal Roof Mount is suitable for flat to pitched tin roof installations with timber framed rafters for attaching the mount (excluding fasteners and U-bolt).   The mount provides a mast base fixing point for customer designed...

The Hills Antenna FB603684 Add a Mast is a 1.5m x 25mm mast that, when used can add extra height onto a pre-existing mast.

The Hills Antenna FB901310 6mm Guy Wire Thimble (12-Pack) is used to assist with tying off guywire at the end of a guy plate. It aids in preventing the guywire from breaking against the edge of the guy plate.

The Hills Antenna FB901214 U-Bolt is a spare or replacement U-bolt for various Hills antenna ranges and is provided with nuts. It can also be used with any custom DIY mounting application.   It is M6 x 95mm x 57C assembly and zinc plated.

 The Hills Antenna FB602384 VPB1 Assembly mount is required when an antenna is to be mounted for vertical polarity signal areas.   It includes the U-Bolts and clamp for attaching a mast (purchased separately) to the top of an existing or...