TV, RF & Satellite

The Hills Antenna BC3903 120cm Satellite Dish is a high-performance, Foxtel-approved solution for commercial and residential Pay TV installations, delivering strong Ku band signal reception with minimal loss. This offset elliptical dish excels in urban...

The Hills Antenna BC2843 Coaxial Cable Reel Stand is a durable and practical solution for holding and dispensing coaxial cable reels with ease. Designed for installers, technicians, and contractors, this reel stand simplifies cable management on-site,...

The Hills Antenna BC2094 RG11 F-Type Male Hex Crimp Connector is a professional-grade termination fitting designed for reliable, high-performance connections on RG11 coaxial cables, especially in demanding outdoor or long-distance applications like...

The Hills Antenna BC72028A F-Type Male 75Ω Waterproof Terminator (20-Pack) is designed to provide signal stability and protect unused F-Type ports in TV distribution systems. Ideal for use on passive devices such as splitters, taps, and other...

The Hills Antenna BC81262 1 Way -15dB 40-860MHz Slim Line Tap is a professional inline signal attenuator and monitor point designed for wall mount plates in TV antenna, Foxtel, or MATV systems. This slim, low-profile tap allows technicians to connect a...

The Hills Antenna BC80512 F-Type Female F81 HRL Barrel Connector (5-Pack) is a premium blue inline joiner for reliable screw-on connections between two F-Type male cables or a cable and wall plate in TV antenna, Foxtel, or satellite systems. Clipsal...

The Hills Antenna BC89239A is the genuine Foxtel-approved diplexer (IPL #F10468) that allows installers to combine Foxtel/satellite and free-to-air digital TV signals onto a single coaxial cable – or separate them at the wall plate. Specifically...

The Hills Antenna FB607236 1.4m FTA Tile Roof Mount is the ideal professional-grade solution for securely installing TV antennas on Australian tiled homes. Designed specifically for terracotta and concrete tile roofs, this mount features a robust timber...

The Hills Antenna FB607227 gutter mount metal frame kit is used to facilitate the installation of a gutter mount on a metal frame roof. It is not suitable for cyclone rated areas (please see FB607279). Features: NBN APL Approved - MA-2018-000019 Foxtel...

The Hills Antenna FB607188 is the official replacement M8 × 90 mm U-bolt assembly (63.5 mm inside width) supplied with two zinc-plated hex nuts. Used across dozens of Hills mounts, masts, stay bars and satellite brackets – this is the exact...

Dominate distance and durability in antenna mounting with the elite Hills Antenna Eave/Wall Bracket FB603554 1400mm, crafted for ultimate domestic elevation sans roof involvement. This 1400mm beast, sheathed in premium hot-dipped galvanized silver,...

The Hills Antenna FB902186 B Section lock ring suits a 38mm mast.   It is a round lock ring to suit the mast diameter and is provided with one locking thumb bolt.

The Hills Antenna FB902178 A Section lock ring suits a 31.8mm mast.   It is a round lock ring to suit the mast diameter and is provided with one locking thumb bolt.  

The Hills Antenna FB607137C is the genuine Foxtel-approved, Australian-made 2-way tin roof tripod designed for the largest domestic satellite dishes – 90 cm and 1.2 m – on metal-clad (tin/Colorbond) roofs with timber framing. Its...

The Hills Antenna FB164A is the 12-metre heavy-duty telescopic mast used by professional installers for difficult fringe and rural digital TV reception. Four-section design collapses for transport yet extends to a full 12m with exceptional rigidity and...

The Hills Antenna FB607011A is the genuine dual-approved extended-reach fascia and wall mount for 65 cm and 80 cm Foxtel/VAST satellite dishes and NBN Fixed Wireless installations in W50 regions A/B. Its long galvanised steel arm provides the extra...

The Hills Antenna FB50A is the complete accessory kit required to safely install and guy the Hills Antenna FB180A 6m Telomast. Without this kit the mast cannot be properly secured or extended – it is an essential companion product for every 6m...

The Hills Antenna BC87182 is a tough, Australian-made metal roof mount designed specifically for tin, Colorbond and metal roofs with timber rafters. This fully-welded, hot-dip galvanised bracket provides a rock-solid fixing point for your TV antenna mast...

The Hills Antenna FB603684 is the quick and professional way to gain an extra 1.5 metres of height on any existing antenna mast up to 40 mm diameter. Perfect when you need just a little more elevation for better digital TV reception without replacing the...

The Hills Antenna FB901214 U-Bolt is a spare or replacement U-bolt for various Hills antenna ranges and is provided with nuts. It can also be used with any custom DIY mounting application.   It is M6 x 95mm x 57C assembly and zinc plated.