Hardware

Digitek 2.4M Mast to Suit 14ATPMBKE

Digitek 1.2M Mast to suit 14ATPMBKE

Digitek 1160 - 2000mm Extendable Staybars Extendable - adjust and fix to your desired length Pre-galvanised Works with stay bar collars (14JSBC1, 14JSBC2, 14JSBC3) Fixed stay bars also available (14FSB4, 14FSB6, 14FSB8)

Digitek Portable Satellite Tripod Ground Mount Features: 44mm diameter mast included Pre-galvanised steel- Heavy Duty Powder Coating. Suits 65 - 80cm satellite dishes Includes leveling bubble Rubber feet Holes throgh feet allowing pegging down All legs...

Hills Antenna 1.8M Rafter Mount - Galvanised Features: 25mm diameter mast Hot dip galvanised steel Attaches to a rafter and penetrates the roof via a lead flashing kit or rubber boot Heavy duty model also available (14BRMHDGAL)

Digitek 2 Piece FTA 1.8M Antenna Gutter Mount - Galvanised Features: 25mm diameter mast Pre galvanised mast and hot dip galvanised foot

Digitek FTA 1.8M Antenna Gutter Mount - Galvanised Features: 25mm diameter mast Hot dip galvanised steel 10mm Heavy Duty Base plate

Hills Antenna Universal Tin/Tile Adjustable Roof Mount Features: Strong non-penetrating tin and tile roof mount No drilling or cutting of tiles required Includes 2 x extendable stay bars (1.11M - 1.90M) All screws and mounting hardward supplied Pair...

Digitek 1.8M Mast to suit 14ATPMBKE Features: 25mm diameter mast Pre galvanised steel For use with 14ATPMBKE Universal Kit Other sizes also available (14ATPM1.2, 14ATPM2.4)

Digitek 1.2M Heavy Duty Mast to Suit 14ATPMBKE Features: 32mm diameter mast 1.2mm metal wall thickness Pre galvanised steel For use with 14ATPMBKE Universal Kit Other sizes also available (14ATPM1.8HD, 14ATPM2.4HD)

Digitek Strammit Roof Mount - Wide Foot Features: Suits Strammit or Brownbuilt clamp‐down flat decking Non penetrating design Can support standard masts without guying Mast sold seperately Suits masts up to 40mm in diameter Hot dip galvanised steel Foot...

Digitek Light Angle Roof Mount - Galvanised Features: Hot dip galvanised steel Includes U bolt kit 270 x 85 x 75mm Suits up to 58mm pole

The Hills Antenna BC2880-6PACK Tile Tripod and Mast is a free-standing free-to-air mount that is suitable for tile roof installations. The mount also includes a 1m long, 25mm round steel tube mast to provide adequate installation height for metropolitan...

The Hills Antenna BC85126 guywire is perfect for domestic applications where a mast needs to be braced and supported.  It is a 180m coil made up of 7 strands of galvanised wire, each 0.90mm. Is suitable for bracing tall DIY masts with FTA...

The Hills Antenna FB607294 is a 91.5m coil of guy wire used for masting applications to provide stability to the mast.   It is a 6 strand wire with each strand 3.0mm, making it the ideal strength guy wire for Hills Telomast installations.

The Hills Antenna FB607174 is a 48mm x 1250 ground mount that can be used as an alternative to a roof mount. It is suited to 80cm satellite dishes only. Features: The installation site should be chosen so that the dish will not be subjected to...

The Hills Antenna FB607251 is a centre mounted boom support brace for the Tru-Spec Antenna.

The Hills Antenna FB606874 300mm Fascia Riser Mount is designed to attach to the fascia of a building, situated underneath the gutter. The curve of the mast provides an ideal solution when adequate clearance for the gutter is required. The mount comes...

The Hills Antenna FB902048 comes in a pack of two 1.2m x 16mm stay bars to help support and brace fascia brackets. A stay bar collar will need to be purchased separately.   This pack is beneficial in any application where extra support is required...

The Hills Antenna FB607231A Ezy HD 900mm gutter mount is suitable for all domestic installations as well as C3 rated cyclone areas. It is the perfect solution for installers who are not able to mount a satellite directly on the roof due to safety...